- Home
- »
- Our Products
- »
- Drying Equipment
Drying Equipment
Silica Sand Dryer
Automation Grade | Automatic |
Capacity | 1.8-5 Ton |
Automatic Grade | Automatic |
Size | 1200 x 10000 mm |
Motor Power | 7.5 HP |
Speed | 4 RPM |
Input Moisture | 15-25% |
Output Moisture | 8% |
Coal Calorific Value | 5500 KCAL/KG |
Feed Inlet Temperature | 700 +/- 50 Deg C |
We offer our clients a fine and excellent grade Silica Sand Dryer, which is used in drying and cooling of materials that flow freely. This product is provided with a rotating shell which is supported on rollers & tires. Our product is available in various configurations. It requires 7.5HP to 25 HP electric motor to work efficiently. The Silica Sand dryer we provide is very helpful in the various process.
Working Principal
Firstly, use one belt conveyor or bucket elevator to Sand the wet silica sand into the drum of Silica Sand Dryer
- Conveyed from the feed screw directly into the Silica Sand Dryer, raised by the drum wall panels repeatedly, and scattered by the crushing blow devices.
- Materials and the negative high-temp media are combined sufficiently to complete heat and mass transfer process.
- The result of the drum wind angle and induced air, feed materials move slowly and discharged from the spiral after drying, exhaust gas handled by the cyclone, venting to the atmosphere.
- The dryer adopts the riding wheel device, which makes the riding wheel and the rolling ring linear touch all the time. Thus the abrasive and the power loss are greatly reduced. The granularity and the moisture and be controlled by the customer’s demand. When drying the coal slurry, the product moisture can be less than 5% and the granularity and be less than 6mm.
Specification :
Size | Processing | HP | RPM | Input | Output | Coal | Feed inlet |
MM | Tons | Motor | Mint. | Moisture | Moisture | Calorific Value | Temperature |
1200 × 12000 | 1.8-5 | 11 | 4 | 15-25% | <8% | >5500 KCAL/KG | 700±50°C |
1500 X14000 | 10-12.5 | 15 | 3 | 15-25% | <8% | >5500 KCAL/KG | 800±50°C |
1800 X 14000 | 15-18 | 18.5 | 3 | 15-25% | <8% | >5500 KCAL/KG | 800±50°C |
2000 X 16000 | 20-25 | 18.5 | 2.5 | 15-25% | <8% | >5500 KCAL/KG | 800±50°C |
2200 X 18000 | 25-30 | 22 | 2.5 | 15-25% | <8% | >5500 KCAL/KG | 800±50°C |
Additional Information:
- Production Capacity: 1.8 to 5 TPH
- Delivery Time: 45 Days
MS Rotary Dryer
Capacity | 0.8-2.0 Ton |
Automation Grade | Automatic |
Speed | 4 RPM |
Size | 800 x 8000 mm |
Material | MS |
Brand | Dream Techno Machineries & Equipments Pvt. Ltd. |
Motor Power | 4 HP |
Input Moisture | 8% OR10% |
Feed Inlet Temperature | 560 +/- 50 Deg C |
Output Moisture | 1% OR 3% |
Features:
- Sturdy design
- Hassle-free operations
- Minimal maintenance
Specification :
Processing | HP | RPM | Input | Output | Feed inlet | |
Size | Tons | Motor | Mint. | Moisture | Moisture | Temperature |
φ 600 × 6000 | 0.5-1.5 | 2 | 4 | 8% OR10% | 1% OR 3% | 560±50??? |
φ 800 × 10000 | 0.8-2.5 | 4 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1000 × 10000 | 1.0-3.5 | 5.5 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1200 × 10000 | 1.8-5 | 7.5 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1200 × 12000 | 1.8-5 | 12.5 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1500 × 12000 | 2.1-6 | 15 | 3 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1800 × 12000 | 3.5-9 | 18 | 3 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 2200 × 12000 | 6.0-14.8 | 19 | 2.5 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 2200 × 18000 | 10.0-18 | 23 | 2.5 | 8% OR 10% | 1% OR 3% | 560±50??? |
Additional Information:
- Delivery Time: 45 Days
MS Sand Dryer
Minimum Order Quantity: 1 Unit
Automation Grade | Automatic |
Capacity | 1.8-5 Ton |
Speed | 4 HP |
Size | 1200 x 12000 mm |
Design | Customized |
Motor Power | 12.5 HP |
Input Moisture | 8% OR 10% |
Output Moisture | 1% OR 3% |
Feed Inlet Temperature | 560 +/- 50 Deg C |
We offer our clients a fine and excellent grade Rotary Sand Dryer, which is used in drying and cooling of materials that flow freely. This product is provided with a rotating shell which is supported on rollers & tires. Our product is available in various configurations.
Model :
- In this type of Dryer, model is not fixed.
- We are manufacturing dryer on the basis of moisture content, product suitability , and Capacity.
- As per that we decide which dryer suits for your product as Continuous type, Batch Type, Rotary Kiln, Activated Drum Dryer, Tunnel Dryer
- Available in Different Models as per client requirement.
- Using Different type of Plates which has sustainability in heating scope
Specification :
Processing | HP | RPM | Input | Output | Feed inlet | |
Size | Tons | Motor | Mint. | Moisture | Moisture | Temperature |
φ 600 × 6000 | 0.5-1.5 | 2 | 4 | 8% OR10% | 1% OR 3% | 560±50??? |
φ 800 × 8000 | 0.8-2.0 | 4 | 4 | 8% OR10% | 1% OR 3% | 560±50??? |
φ 800 × 10000 | 0.8-2.5 | 4 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1000 × 10000 | 1.0-3.5 | 5.5 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1200 × 10000 | 1.8-5 | 7.5 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1200 × 12000 | 1.8-5 | 12.5 | 4 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1500 × 12000 | 2.1-6 | 15 | 3 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 1800 × 12000 | 3.5-9 | 18 | 3 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 2200 × 12000 | 6.0-14.8 | 19 | 2.5 | 8% OR 10% | 1% OR 3% | 560±50??? |
φ 2200 × 18000 | 10.0-18 | 23 | 2.5 | 8% OR 10% | 1% OR 3% | 560±50??? |
Additional Information:
- Delivery Time: 45 Days
Drum Dryer
Minimum Order Quantity: 1 Unit
Capacity | 1 TPH - 30 TPH |
Material | Steel |
Automation Grade | Automatic |
Max Temperature | 100 degree - 300 degree |
Power | 100 |
Voltage | 440 |
Power Source | Electric |
Brand | Dream-tech Machineries & Equipment Pvt. Ltd. |
Application | Industrial |
We offer our clients a fine and excellent grade Rotary Dryer, which is used in drying and cooling of materials that flow freely. This product is provided with a rotating shell which is supported on rollers & tires. Our product is available in various configurations.
Rotary Dryer is also known as a continuous dryer. For the drying of material the rotary dryer is used widely, and usually, it is single drum dryer and triple-pass drum dryer.
Advantage :
- Large production capacity
- Continuous operation
- Simple structure
- Easy to operate; less failure
- Low maintenance costs
- A wide range of application
- Fluid resistance is small
You can use it to dry granule-like material, for that adhesion material
Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product
- Cleaning easy
- Simple system
- Flexibility in fuels used
Additional Information:
- Production Capacity: 1 TPH - 30 TPH
- Delivery Time: 45 Days